Self Leveling Flooring
At Redwop Chemicals, we provide high-quality Self Leveling Flooring solutions, ensuring a smooth and durable finish for various applications. Our products are designed to work with different flooring types, including Epoxy Flooring, Cement Flooring, and PU Flooring, offering long-lasting results for both residential and commercial spaces. Trust our expertise for all your flooring needs.
Redwop Self-Leveling Flooring is a high-performance, fiber-reinforced cementitious underlayment designed for smooth, flat floor substrates. Engineered for superior flowability and strength, it provides a durable, self-smoothing surface that adapts to a variety of tile, vinyl, or wood floor finishes without excessive screeding or troweling.
Key Features & Benefits
This compound boasts exceptional flow characteristics, allowing it to effortlessly level floor irregularities from 1 mm to 10 mm in a single pour. Reinforced with micro-fibers, it offers enhanced crack resistance, toughness, and impact protection. Its pumpable consistency reduces application time and labor cost, while rapid drying (accessible to foot traffic in 3–4 hours, tile-ready in 24–48 hours) accelerates project schedules. Low VOC content promotes indoor air quality, making it safe for occupied spaces following drying.
Ideal Applications
Perfect for residential and commercial substrates, including concrete slabs, screeds, plywood underlayments, and radiant-heated floors. It’s ideal for setting ceramic, porcelain, stone tiles, vinyl, carpet, and hardwood. Especially suited for renovating uneven surfaces in living rooms, kitchens, bathrooms, retail spaces, and offices where flatness and speed matter most.
Application Guide
First, prepare the floor by removing debris, dust, grease, and curing agents. Apply a suitable primer compatible with substrate porosity and ambient temperature (15–30 °C). Mix one 25 kg bag with 5.5–6 L of clean water for pumpable consistency; adjust water for flow level. Mix vigorously for 2–3 minutes until smooth and lump-free, then apply immediately using bucket pour or pump. Release trapped air with a spiked roller, and allow 3–4 hours before foot traffic. Tile installation can begin within 24 hours for thin-bed and 48 hours for thick applications. Maintain a controlled ambient temperature (≥ 10 °C) and avoid drafts or direct sunlight during curing.
FAQ's
Self Leveling Flooring is a smooth, durable surface that can be applied to uneven floors. It automatically adjusts to create a level surface, making it ideal for both residential and commercial applications.
Our Self Leveling Flooring works seamlessly with Epoxy Flooring, Cement Flooring, and PU Flooring, giving you flexibility in choosing the right solution for your project.
The drying time for Self Leveling Flooring depends on the environment and product used, but typically it takes between 24-48 hours for full curing.
Yes, Self Leveling Flooring can be applied over most existing floors, including Cement Flooring, as long as the surface is clean, dry, and free of debris.
At Redwop Chemicals, we provide high-performance solutions with excellent durability, ensuring your Self Leveling Flooring remains smooth and long-lasting, even in high-traffic areas.
Yes. It creates a smooth, flat substrate ideal for vinyl, laminate, engineered wood, or carpet installations. Compatible with floor coverings after 24–48 hours drying.
Ideal layer thickness ranges from 1 mm to 10 mm. For deeper fills, apply in multiple layers or combine with a backer board.
Walkable in 3–4 hours; ready for tile in 24 hours for thin-set and up to 48 hours for thicker layers.
Yes. Primer enhances adhesion and reduces porosity. Choose based on manufacturer’s substrate guidelines.
Absolutely—it is pumpable with standard floor leveling equipment like Putzmeister or MTEC mixers.
Maintain 10–30 °C ambient and substrate temperature, with humidity under 75%. Avoid direct sun and drafts.
No—it features fiber reinforcement and shrink controls designed to minimize shrinkage and resist cracking.
Yes—formulated with low volatile organic compounds, suitable for use in occupied residential and commercial spaces.
Yes—compatible with radiant heating. Apply after initial temperature testing and ensure full drying before activating heat.
Approximately 1.6 kg per mm per m². A 25 kg bag at 5 mm covers around 3.1 m².