Ready Mix Plaster
Redwop Chemicals offers high-quality Ready Mix Plaster, designed for smooth and durable wall finishes. Our ready mix plaster for walls is easy to apply, saving time and effort on construction projects. As trusted ready mix plaster manufacturers, we ensure our product delivers exceptional performance for both residential and commercial applications, providing a flawless finish and long-lasting results.
Redwop Ready Mix Plaster is a factory-mixed, polymer-enhanced cement-based plaster engineered for professional finish work on internal and external walls and ceilings. By using high-quality cement, graded sand, performance additives, and a proprietary polymer blend, this ready-to-use solution ensures smooth application, minimal shrinkage, and crack-resistant surfaces in a single coat.
Ideal Applications
Ideal for new or renovation projects in residential, commercial, and institutional buildings, Redwop plaster is suitable for plastering walls and ceilings up to 12 mm thick. It works excellently on both internal and external surfaces—brickwork, blockwork, concrete substrates, and protein board. The plaster creates durable, crack-resistant, and low-porosity walls—ready to accept decorative paints, textures, or tiles.
Application Guide
Add 5–6 L of clean water per 20 kg bag and mix with a paddle mixer until a lump-free, creamy paste is achieved. For manual application, use a trowel to spread the plaster in 8–12 mm layers, pressing well against the substrate. For larger areas, mechanical spray machines can be employed. After application, level and finish as required. Light stringing or misting is advised in hot, dry conditions to retain moisture. The surface dries firm to the touch within 2–3 hours; full curing completes in 7–28 days per IS recommendations.
Key Features & Benefits
Redwop’s Ready Mix Plaster delivers superior adhesion to substrates such as brick, AAC, fly-ash blocks, and concrete—thanks to its polymer-modified composition. It ensures consistent texture and thickness with each bag, reducing rebound waste and variation from manual mixing. Fast-setting properties allow finishing within hours, enhancing site productivity. The plaster also offers excellent moisture resistance, reducing internal dampness and preventing thermal cracks while providing a premium, smooth base for paint and wall finishes.
FAQ's
Ready Mix Plaster is a pre-mixed formulation of cement, sand, and additives, designed for easy application to walls, providing a smooth and durable finish.
Ready Mix Plaster for walls offers ease of application, better adhesion, and superior finish compared to traditional plastering methods, saving time and effort on construction projects.
Yes, our Ready Mix Plaster is versatile and can be used for both interior and exterior applications, providing a strong and long-lasting finish.
As trusted ready mix plaster manufacturers, we offer a high-quality, easy-to-use product that ensures excellent bonding and smooth finishes, making it ideal for a variety of wall plastering needs.
Simply mix the ready mix plaster with water according to the instructions and apply it directly to the wall for a smooth and even finish.
Ready mix plaster is a factory-prepared dry powder blend of cement, graded sand, and performance-enhancing polymers. Unlike traditional on-site mixes, it ensures consistent quality, faster application, and reduced material wastage.
Yes, most ready mix plasters are designed for both internal and external applications. However, always verify if the product is weather-resistant for external use.
Coverage varies by thickness and surface type, but on average, a 40 kg bag covers 12–15 sq.ft at 12 mm thickness on a smooth surface.
No, it’s a pre-blended product. You only need to mix it with clean water as per manufacturer guidelines—no need to add extra cement, sand, or admixtures.
The standard thickness ranges between 10 mm to 15 mm. For undulated surfaces, a base coat or additional leveling may be needed.
Yes, light water curing is necessary for at least 3 to 5 days to ensure proper hydration and bonding, especially for external walls.
Yes, after the surface has fully dried and cured. A primer or sealer is usually applied before painting or puttying for better finish and adhesion.
Tools include a mixing bucket or machine, plastering trowel, hawk board, measuring container for water, and sponge or aluminum floats for finishing.
Absolutely. Since it eliminates the need for on-site mix proportioning and sand sieving, it reduces labor, speeds up the plastering process, and ensures a cleaner work environment.
While the per-bag cost may seem higher, it reduces labor, material wastage, and application time, making it more economical in large-scale or time-sensitive projects.