TERATILE PROLIX EXTRA
TERATILE PROLIX EXTRA is a cementitious powder available for fixing of vitrified tiles for floor & wall. The set adhesive is water resistant and is suitable for use in showers and totally immersed situations such as swimming pools.
- Price : 2500 (20 KG)
Advantages:
- Very High Polymer modified
- Very High performance and strength
- Excellent Water & frost resistance
- Excellent tensile & shear adhesion
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Coverage Calculator
Uses:
- Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc.
- Domestic and Industrial Application
- Applicable of tiles size 250mmX400mm, 300mX300mm, 300mmX400mm, 300mmX600mm 300mmX900mm, 600X1200mm, 1000mm X1000mm, 1200x2400mm.
- External and internal application
- External and internal application
- Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application
- For tile & stone adhesive selection www.redwop.net
Related Products
FAQ's
TERATILE PROLIX EXTRA is a high-performance, polymer-modified cementitious tile adhesive of Grade Type-IV, C2TES2, specifically designed for fixing ceramic tiles, vitrified tiles, glass mosaic, and all types of natural stones. It supports large tile formats such as 6”x8”, 8”x8”, and above, and is ideal for use on both floors and walls in internal and external environments.
- High polymer modification for enhanced performance
- Excellent tensile and shear adhesion strength
- Suitable for submerged conditions like swimming pools
- Compliant with IS 15477:2019 and EN 12004 standards
It can be applied on a wide variety of surfaces including:
- Reinforced Cement Concrete (RCC)
- Cement sheets
- Plaster
- Autoclaved Aerated Concrete (AAC) blocks
- Existing tiles (tile-on-tile applications)
- Natural stone surfaces
This adhesive is ideal for ceramic tiles, vitrified tiles, porcelain tiles, glass mosaic, and natural stones such as sandstone, khatu, lapato, quartz, limestone, granite, elevation stone, Rajasthan black stone, and marbles (for internal applications).
- Clean the substrate to remove dirt, efflorescence, laitance, or other loose materials.
- Moisten the dry surface slightly.
- Clean the tile backs using a wire brush and rinse thoroughly.
- Mix 20 kg of tile adhesive powder with 5.2 liters of clean water using an electric blender to achieve a smooth, lump-free paste.
- Apply the paste on both the substrate and the back of the tile as needed.
- Comb the adhesive for better bonding before placing the tile.
Approximately 40 to 50 ft² per 20 kg at a 3 mm thickness. Actual coverage may vary depending on surface texture and tile size.
- Appearance: Grey/White powder
- Tensile adhesion strength @ 28 days: >2 N/mm²
- Shear adhesion strength @ 28 days: >3 N/mm²
- Deformability: S2
- Adjustability time: >25 minutes
- Slip resistance: <0.5 mm
- Open time: >25 minutes
It is available in 20 kg and 40 kg bags.
It has a minimum shelf life of 24 months when stored at room temperature (around 27°C) in a dry environment.
- Do not add water or powder once the adhesive starts to set.
- Avoid prolonged skin contact; rinse off any splashes with water.
- In case of eye contact, wash immediately with clean water and seek medical advice.
For more information, visit the official product page: TERATILE PROLIX EXTRA – Redwop Chemical.
For technical support, contact +91 97246 55551 or email [email protected].