TERATILE PROLIX
TERATILE PROLIX cementitious powder available for fixing of ceramic and vitrified tiles for floor & wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.
- Price : 1800 (20 KG)
Advantages:
- Very High Polymer modified
- Very High performance and strength
- Excellent Water & frost resistance
- Excellent tensile & shear adhesion
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Coverage Calculator
Uses:
- Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc.
- Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, 600X1200mm, 1000X1000mm
- Domestic and Industrial Application
- External and internal application
- Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application
- For tile & stone adhesive selection www.redwop.net
Related Products
FAQ's
TERATILE PROLIX is a high-performance, polymer-modified cementitious tile adhesive of Grade Type-IV, C2TES2. It is designed for fixing ceramic tiles, glass mosaic, vitrified tiles, and all types of natural stones, especially in tile sizes of 5”x4”, 6”x8” and above, on both floors and walls. It performs reliably in both internal and external environments, including submerged applications like swimming pools.
- Very high polymer modification for enhanced performance
- Excellent water and frost resistance
- Superior tensile and shear adhesion
- Suitable for a variety of tile sizes and types
This adhesive is compatible with multiple substrates, such as:
- Reinforced Cement Concrete (RCC)
- Cement sheets
- Plaster
- Autoclaved Aerated Concrete (AAC) blocks
- Existing tiles (tile-on-tile applications)
- Natural stone surfaces
TERATILE PROLIX is ideal for porcelain tiles, vitrified tiles, ceramic tiles, and natural stones like sandstone, khatu, lapato, quartz, limestone, granite, elevation stone, Rajasthan black stone, composite stone, glass white, and marbles for internal installations.
- Clean the surface thoroughly to remove any efflorescence, laitance, dirt, or loose particles.
- Lightly sprinkle water over the surface to dampen it.
- Clean the tile backs with a wire brush and rinse to eliminate dryness.
- Mix 20 kg of adhesive powder with approximately 5.2 liters of clean water using an electric blender until a smooth paste forms.
- Apply the adhesive to both the substrate and tile, and comb it for better grip.
- Press tiles firmly into place.
Approximately 3.5 kg/m² at a 3 mm thickness using a thin-bed trowel. Actual coverage may vary based on substrate condition and technique.
- Appearance: Grey/White colored powder
- Tensile adhesion strength @ 28 days: >1.05 N/mm²
- Shear adhesion strength @ 28 days: >1.4 N/mm²
- Deformability @ 28 days: S2
- Adjustability time: >25 minutes
- Slip resistance: <0.5 mm
- Open time: >25 minutes
Available in 20 kg and 40 kg bags.
TERATILE PROLIX has a shelf life of at least 24 months when stored at room temperature (around 27°C) in a dry place.
- Do not add extra water or powder once the mixture starts to set.
- Avoid skin contact; the product is slightly acidic. Rinse off immediately with water.
- In case of eye contact, wash thoroughly with water and seek medical help.
For further details, visit the product page: TERATILE PROLIX – Redwop Chemical.
For technical support, contact +91 95551 97771 or email [email protected].