TERATILE PLATINUM
TERATILE PLATINUM cementitious powder available for fixing of ceramic and vitrified tiles for floor & wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.
- Price : 1300 (20 KG)
Advantages:
- Suitable for fixing ceramic tiles for floor and wall
- Polymer modified adhesive
- Good strength
- Easy mixing and application
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Note:
- *Mix 50% polymix for engineered stones
- ** For Tile on tile application system may vary of adhesive standard, before application please contact Redwop technical team. We recommend product as per substrate and finish material.
Coverage Calculator
Uses:
- Tile claddings
- Porcelain tile
- Vitrified tile
- Low porous stones
- Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, [600X1200mm @internal]
- Sand stone, khatu, Lapato, Quartz *, Lime stones, Granite, Elevation stone, Rajasthan black stone & Marbles in internal application
- For tile & stone adhesive selection www.redwop.net
Related Products
FAQ's
TERATILE PLATINUM is a cementitious, polymer-modified tile adhesive of Grade Type-III, C2TES1*, specially formulated for fixing ceramic tiles, glass mosaic, vitrified tiles, and all types of natural stones on floors and walls. It offers excellent water resistance and is ideal for use in showers and fully immersed situations like swimming pools.
- Suitable for fixing ceramic tiles on floors and walls
- Polymer-modified for enhanced performance
- Provides good strength
- Easy to mix and apply
It can be applied on a wide range of surfaces, including Reinforced Cement Concrete (RCC), cement sheets, plaster, Autoclaved Aerated Concrete (AAC) blocks, existing tiles (for tile-on-tile applications), and natural stone surfaces.
Yes, for tile-on-tile applications, the adhesive system may need customization. It's recommended to contact the Redwop technical team for guidance tailored to your specific substrate and tile type.
Yes, for best results with engineered stones, it's advised to mix 50% POLYMIX with TERATILE PLATINUM.
This adhesive is highly compatible with tile claddings, porcelain tiles, vitrified tiles, and low porous stones. It supports tile sizes including 4”x4” and 4”x6”, as well as larger formats like 250x400 mm, 300x300 mm, 300x400 mm, 300x600 mm, 300x900 mm, and 600x1200 mm (for internal use). TERATILE PLATINUM is also suitable for natural stones like sandstone, khatu, lapato, quartz, limestone, granite, elevation stone, Rajasthan black stone, and marbles.
Yes, once cured, it becomes water-resistant and is perfect for submerged or high-moisture areas such as swimming pools and bathrooms.
Mix the adhesive with clean water until a smooth, lump-free, and workable consistency is achieved. For exact mixing ratios and surface preparation methods, please refer to the official product datasheet or consult the Redwop technical team.
For more details, you can visit the official product page: TERATILE PLATINUM – Redwop Chemical.
For technical support or inquiries, contact Redwop at +91 95551 97771 or email: [email protected].