TERATILE MP
TERATILE MP tile adhesive, is suitable for fixing at 3-6mm bed thickness (can be extended up to 15mm in area of limited extent) wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.
- Price : 950 (20 KG)
Advantages:
- Suitable for fixing ceramic tiles for floor and wall
- Polymer modified adhesive
- Good strength
- Easy mixing and application
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Coverage Calculator
Uses:
- Tile claddings
- Porcelain tile
- Vitrified tile
- Low porous stones
- Applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, [600X1200mm@internal]
- Domestic and Industrial Application
- Sand stone, khatu, Lapato, Quartz, Lime stones, Granite & marbles in internal application
- For tile & stone adhesive selection www.redwop.net
Related Products
FAQ's
TERATILE MP is a high-performance, polymer-modified cementitious tile adhesive of Grade Type-II, C2TE*. It is designed for fixing ceramic tiles, sandstone, lapato, limestone, granite, and marbles, particularly in standard sizes like 2”x4”, on both floors and walls. Suitable for internal and external applications, it also performs well in submerged conditions such as swimming pools.
- Polymer modified for enhanced performance
- Good bonding strength
- Easy to mix and apply
- Suitable for wet areas and submerged environments
TERATILE MP can be applied to a wide range of substrates, including:
- Reinforced Cement Concrete (RCC)
- Cement sheets
- Plaster
- Autoclaved Aerated Concrete (AAC) blocks
- Existing tiled surfaces (tile-on-tile)
- Natural stone surfaces
TERATILE MP can be applied to It is compatible with porcelain tiles, vitrified tiles, ceramic tiles, and natural stones such as marble, granite, lapato, sandstone, and limestone.
a wide range of substrates, including:
- Reinforced Cement Concrete (RCC)
- Cement sheets
- Plaster
- Autoclaved Aerated Concrete (AAC) blocks
- Existing tiled surfaces (tile-on-tile)
- Natural stone surfaces
TERATILE MP is recommended for bed thicknesses between 3–6 mm, and can be extended up to 15 mm in limited areas where leveling is required.
Yes, once cured, the adhesive becomes water-resistant, making it ideal for showers, bathrooms, and submerged areas like swimming pools.
- Appearance: Gray/White Powder
- Tensile Adhesion Strength @ 28 days: 1.05 N/mm²
- Shear Adhesion Strength @ 28 days: 1.3 N/mm²
- Deformability: S1
- Adjustability Time @ 20°C: 20 minutes
- Open Time @ 20°C: 20 minutes
- Slip Resistance: 0 mm
TERATILE MP is available in 20 kg and 40 kg bags.
TERATILE MP is available in 20 kg The product has a 6-month shelf life when stored in unopened bags in a cool, dry warehouse environment.and 40 kg bags.
- Do not add additional water or powder once the adhesive has set.
- Avoid prolonged skin contact; it is cement-based and alkaline. Wash immediately if contact occurs.
- In case of eye contact, rinse with clean water and seek medical advice.
For more details, visit the official product page: TERATILE MP – Redwop Chemicals.
For support, call +91 95551 97771 or email [email protected].