TERATILE GP
TERATILE GP a high quality adhesive for the permanent fixing of ceramic & small size of vitrified tiles for vertical and horizontal applications. It is also suitable for use in damp and totally submerged conditions. TERATILE GP tile adhesive is more suitable for internal applications.
- Price : 750 (20 KG)
Advantages:
- Polymer modified
- Excellent adhesion on smooth surfaces
- Forms a dense and impermeable mortar bed
- Self-cure
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Coverage Calculator
Uses:
- Ceramic external application, Vitrified internal application, Porcelain & porous stones
- Permanent fixing of tiles over smooth surfaces
- For specialized applications such as tile on tile and tile-on-glass etc.
- Applicable of tiles size 250mmX400mm,300mX3400mm,300mmX600mm,300mmX900mm 300mmX300mm
- For tile & stone adhesive selection www.redwop.net
FAQ's
TERATILE GP is a high-quality, polymer-based tile adhesive of Grade Type-II, C2TE*. It is designed for the permanent fixing of ceramic tiles, sandstone, and mint stone—including tiles sized 2”x4”—on both vertical and horizontal surfaces. It is suitable for internal applications and can also be used in damp and fully submerged conditions, such as swimming pools.
- Polymer modified for enhanced performance
- Excellent adhesion on smooth surfaces
- Forms a dense and impermeable mortar bed
- Self-curing properties
TERATILE GP can be applied on a variety of substrates, including:
- Reinforced Cement Concrete (RCC)
- Cement sheets
- Plaster
- Autoclaved Aerated Concrete (AAC) blocks
- Existing tiles (tile-on-tile applications)
- Natural stone surfaces
It is suitable for ceramic tiles, small-sized vitrified tiles, porcelain tiles, and porous stones. It performs exceptionally well as an adhesive for ceramic tiles, sandstone, and mint stone.
- Clean the surface from efflorescence, laitance, dirt, and loose particles
- Lightly sprinkle water over the surface to moisten it.
- Clean the backside of the tiles using a wire brush and rinse thoroughly.
- Mix 20 kg of tile adhesive powder into 3.6 liters of clean water using an electric blender.
- Apply the adhesive paste on both the tile and substrate using a notched trowel.
- Comb the surface to ensure a firm grip between tile and base.
Approximately 40 to 50 ft² per 20 kg at a 3 mm thickness. Coverage may vary depending on surface condition and application method.
- Pot life at 27°C: Approximately 2 hours
- Open time: More than 20 minutes
- Adjustability time: More than 20 minutes
- Appearance: Grey/White dry powder
- Bulk density: 1.82 gm/cc
- Tensile adhesion strength @ 28 days: >0.7 N/mm²
- Shear adhesion strength @ 28 days: >1.1 N/mm²
- Slip resistance: <0.5 mm
It is available in 20 kg and 40 kg bags.
The shelf life is a minimum of 24 months when stored at room temperature (approximately 27°C).
- Do not add extra water or powder once the adhesive has started setting.
- Avoid skin contact as it is mildly acidic; rinse any splashes immediately.
- In case of eye contact, wash thoroughly with water and seek medical help if needed.
For technical details or support, visit the official product page: TERATILE GP – Redwop Chemical, call +91 97246 55551, or email [email protected].