TERATILE GOLD
TERATILE GOLD tile adhesive, is suitable for fixing at 3-6mm bed thickness (can be extended up to 15mm in area of limited extent) wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.
- Price : 950 (20 KG)
Advantages:
- Polymer modified
- Excellent adhesion on smooth surfaces
- Forms a dense and impermeable mortar bed
- Self-cure
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Note :
- *For Tile on tile application system may vary of adhesive standard, before application please contact Redwop technical team. We recommend product as per substrate and finish material.
Coverage Calculator
Uses:
- Porcelain tile
- Vitrified tile
- Ceramic tile
- Low porous stones
- Interior floor and wall applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm,600X1200mm
- Sand stone, Lapato, Lime stones, Granite & marbles in internal application
- For tile & stone adhesive selection www.redwop.net
Related Products
FAQ's
TERATILE GOLD is a high-performance, polymer-modified cementitious tile adhesive of Grade Type-II, C2TE*. It is specifically designed for fixing ceramic tiles, sandstone, lapato, limestone, granite, and marbles, especially in sizes like 2”x4” and 4”x4”. TERATILE GOLD is suitable for both floors and walls and performs reliably in internal, external, and submerged environments such as swimming pools.
- Polymer modified for enhanced performance
- Excellent adhesion on smooth surfaces
- Forms a dense and impermeable mortar bed
- Self-curing properties
- Suitable for submerged conditions like swimming pools
It is compatible with a wide range of substrates including:
- Reinforced Cement Concrete (RCC)
- Cement sheets
- Plaster
- Autoclaved Aerated Concrete (AAC) blocks
- Existing tiles (tile-on-tile applications)
- Natural stone surfaces
This adhesive is perfect for use with porcelain tiles, vitrified tiles, ceramic tiles, mosaic tiles, and natural stones like sandstone, khatu, lapato, quartz, limestone, granite, and marbles, making it ideal for both residential and commercial applications.
- Clean the substrate thoroughly to remove efflorescence, laitance, dust, or loose debris.
- Lightly moisten the surface with water.
- Clean the tile backs using a wire brush and rinse with water until no dry dust remains.
- Mix 20 kg of adhesive powder with approximately 5–5.5 liters of clean water using an electric blender until smooth.
- Apply the paste evenly on both tile and substrate as required.
- Comb the surface to ensure strong bonding.
Approximately 3.5 kg/m² at a 3 mm thickness using a thin-bed trowel. Coverage may vary depending on the surface and application technique.
- Appearance: Grey/White powder
- Tensile adhesion strength @ 28 days: >1.05 N/mm²
- Shear adhesion strength @ 28 days: >1.4 N/mm²
- Deformability: S1
- Adjustability time: >25 minutes
- Slip resistance: <0.5 mm
- Open time: >25 minutes
Available in 20 kg and 40 kg bags.
The product maintains a minimum shelf life of 24 months when stored under normal room temperature (approximately 27°C) in dry conditions.
- Do not add extra water or powder once the adhesive has started setting.
- Avoid prolonged skin contact; rinse immediately if it occurs.
- In case of eye contact, wash thoroughly with clean water and seek medical attention if needed.
For additional details, visit the official product page: TERATILE GOLD – Redwop Chemical.
For support, call +91 95551 97771 or email [email protected].