EPFLOOR 100F is a three part solvent free combination of epoxy resin,
modified amine hardeners filled with
specially graded and selected high
crushing strength, chemically inert
aggregates. It is laid by trowel as
durable chemical resistant screed at
approximately 3-6 mm thickness. This
nominal thickness provides an
impervious topping which is highly
chemical resistant by the very careful
choice of amine curing agent and
graded aggregate. The system
includes two pack epoxy resin primer
and EPFLOOR 100F which are both
supplied in pre-weighed units ready
for on site mixing and application.
The finished, cured floor has a slightly
granular texture of uniform self-color.
It is laid by trowel at approximately 3-
6mm thick depending upon the
requirement. It is highly chemical and
abrasion resistant.
Resistance to abrasion and to a wide range of chemicals.
Good gripping surface to both vehicular and pedestrian traffic.
Designed for easy laying to a fair finish.
Close textured surface, No need for over coatin
Successful use proven in a wide performance variety of aggressive locations
Uses :
Floor topping with exceptional resistance to the surface mechanical wear and attack from chemical spillage.
To get a safe non-slip finish for personnel and vehicular traffic
For heavy engineering plants, chemical handling and process areas, steelworks, dairies, breweries, oil refineries, paint workshops, battery rooms, plating factories, sugar and food industries
Widely used for areas of lighter duty where above average durability and low maintenance costs are required
Explore Our Premium Products
Setting New Standards in Chemical Manufacturing for High-Tech and Industrial Sectors
