TERATILE GP

• Polymer modified for enhanced performance
• Excellent adhesion on smooth surfaces
• Forms a dense and impermeable mortar bed
• Self-curing properties

TERATILE GP can be applied on a variety of substrates, including:

• Reinforced Cement Concrete (RCC)
• Cement sheets
• Plaster
• Autoclaved Aerated Concrete (AAC) blocks
• Existing tiles (tile-on-tile applications)
• Natural stone surfaces

It is suitable for ceramic tiles, small-sized vitrified tiles, porcelain tiles, and porous stones. It performs exceptionally well as an adhesive for ceramic tiles, sandstone, and mint stone.

• Clean the surface from efflorescence, laitance, dirt, and loose particles
• Lightly sprinkle water over the surface to moisten it.
• Clean the backside of the tiles using a wire brush and rinse thoroughly.
• Mix 20 kg of tile adhesive powder into 3.6 liters of clean water using an electric blender.
• Apply the adhesive paste on both the tile and substrate using a notched trowel.
• Comb the surface to ensure a firm grip between tile and base.

Approximately 40 to 50 ft² per 20 kg at a 3 mm thickness. Coverage may vary depending on surface condition and application method.

• Pot life at 27°C: Approximately 2 hours
• Open time: More than 20 minutes
• Adjustability time: More than 20 minutes

• Appearance: Grey/White dry powder
• Bulk density: 1.82 gm/cc
• Tensile adhesion strength @ 28 days: >0.7 N/mm²
• Shear adhesion strength @ 28 days: >1.1 N/mm²
• Slip resistance: <0.5 mm

It is available in 20 kg and 40 kg bags.

The shelf life is a minimum of 24 months when stored at room temperature (approximately 27°C).

• Do not add extra water or powder once the adhesive has started setting.
• Avoid skin contact as it is mildly acidic; rinse any splashes immediately.
• In case of eye contact, wash thoroughly with water and seek medical help if needed.