TERATILE PROLIX EXTRA

TERATILE PROLIX EXTRA is a cementitious powder available for fixing of vitrified tiles for floor & wall. The set adhesive is water resistant and is suitable for use in showers and totally immersed situations such as swimming pools.

2,500.00

Advantages :

  • Very High Polymer modified
  • Very High performance and strength
  • Excellent Water & frost resistance
  • Excellent tensile & shear adhesion

Coverage Calculator

Qnty in kg

Uses :

  • Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc.
  • Domestic and Industrial Application
  • Applicable of tiles size 250mmX400mm, 300mX300mm, 300mmX400mm, 300mmX600mm 300mmX900mm, 600X1200mm, 1000mm X1000mm, 1200x2400mm.
  • External and internal application
  • External and internal application
  • Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application
  • For tile & stone adhesive selection www.redwop.net

FAQ

What is TERATILE PROLIX EXTRA tile adhesive? +

TERATILE PROLIX EXTRA is a high-performance, polymer-modified cementitious tile adhesive of Grade Type-IV, C2TES2, specifically designed for fixing ceramic tiles, vitrified tiles, glass mosaic, and all types of natural stones. It supports large tile formats such as 6”x8”, 8”x8”, and above, and is ideal for use on both floors and walls in internal and external environments.

What are the key advantages of using TERATILE PROLIX EXTRA? +
  • High polymer modification for enhanced performance
  • Excellent tensile and shear adhesion strength
  • Suitable for submerged conditions like swimming pools
  • Compliant with IS 15477:2019 and EN 12004 standards
On which substrates can TERATILE PROLIX EXTRA be applied? +

It can be applied on a wide variety of surfaces including:

  • Reinforced Cement Concrete (RCC)
  • Cement sheets
  • Plaster
  • Autoclaved Aerated Concrete (AAC) blocks
  • Existing tiles (tile-on-tile applications)
  • Natural stone surfaces
What types of tiles are suitable for TERATILE PROLIX EXTRA? +

This adhesive is ideal for ceramic tiles, vitrified tiles, porcelain tiles, glass mosaic, and natural stones such as sandstone, khatu, lapato, quartz, limestone, granite, elevation stone, Rajasthan black stone, and marbles (for internal applications).

How should I prepare and apply TERATILE PROLIX EXTRA? +
  • Clean the substrate to remove dirt, efflorescence, laitance, or other loose materials.
  • Moisten the dry surface slightly.
  • Clean the tile backs using a wire brush and rinse thoroughly.
  • Mix 20 kg of tile adhesive powder with 5.2 liters of clean water using an electric blender to achieve a smooth, lump-free paste.
  • Apply the paste on both the substrate and the back of the tile as needed.
  • Comb the adhesive for better bonding before placing the tile.
What is the coverage of TERATILE PROLIX EXTRA? +

Approximately 40 to 50 ft² per 20 kg at a 3 mm thickness. Actual coverage may vary depending on surface texture and tile size.

What are the technical specifications of TERATILE PROLIX EXTRA? +
  • Appearance: Grey/White powder
  • Tensile adhesion strength @ 28 days: >2 N/mm²
  • Shear adhesion strength @ 28 days: >3 N/mm²
  • Deformability: S2
  • Adjustability time: >25 minutes
  • Slip resistance: <0.5 mm
  • Open time: >25 minutes
What packaging sizes are available for TERATILE PROLIX EXTRA? +

 It is available in 20 kg and 40 kg bags.

What is the shelf life of TERATILE PROLIX EXTRA? +

It has a minimum shelf life of 24 months when stored at room temperature (around 27°C) in a dry environment.

Are there any limitations or precautions to consider? +
  • Do not add water or powder once the adhesive starts to set.
  • Avoid prolonged skin contact; rinse off any splashes with water.
  • In case of eye contact, wash immediately with clean water and seek medical advice.
Where can I find more information or get in touch with Redwop Chemical? +

For more information, visit the official product page: TERATILE PROLIX EXTRA – Redwop Chemical.
For technical support, contact +91 97246 55551 or email info@redwop.net.

Explore Our Premium Products

Setting New Standards in Chemical Manufacturing for High-Tech and Industrial Sectors

Download Brochure Now