TERATILE CLASSIC
TERATILE CLASSIC tile adhesive, is a polymer modified cement based thin bed adhesive for fixing wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo andnatural stone etc.
- Price : 600 (20 KG)
Advantages:
- Non-shrink and waterproof
- Submerged conditions and internal application
- Long time workable
- Good slipresistance
- High adhesive bond strength
- Early strength gain
Substrate:
- RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone
Coverage Calculator
Uses:
- Porcelain tile, Ceramic tile & high porous stone etc.
- Use in damp and totally submerged conditions
- Applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm
- Sand stones , mint stones in internal application
- Internal applications
- For tile & stone adhesive selection www.redwop.net
Related Products
FAQ's
TERATILE CLASSIC is a cement-based, polymer-modified tile adhesive of Grade TYPE I C1TE, designed to fix ceramic and clay tiles on floors and walls. It is suitable for both interior and exterior applications.
- Strong adhesion strength
- Easy to mix and apply
- Good water resistance
- Suitable for vertical and horizontal surfaces
- Extended open time for better workability
You can use it for residential and commercial tiling in areas such as kitchens, bathrooms, balconies, terraces, and other wet or dry environments.
It can be used on cementitious screeds, concrete surfaces, plastered walls, and brickwork. The surface must be clean, level, and free from dust or grease.
Mix 20 kg of powder with about 6.5 to 7.0 liters of clean water to form a smooth, lump-free paste. Let it stand for 5 minutes and then apply it using a notched trowel.
The pot life (usable time after mixing) is 2 to 3 hours, and the open time (time before the adhesive starts to set after spreading) is around 20 minutes.
TERATILE CLASSIC is ideal for standard ceramic and clay tiles. It is specially applied on flooring tile and ceramic tiles. For large format or vitrified tiles, Redwop recommends using specialized adhesives like TERATILE PREMIUM or the PLATINUM series.
A minimum joint width of 2 mm is recommended for proper grouting and durability.
You should wait at least 24 hours after tile installation before starting the grouting process.
Coverage depends on the surface and trowel size, but typically ranges between 3.5 to 4.5 m² per 20 kg bag with a 6 mm notched trowel.
Yes, once cured, TERATILE CLASSIC offers good water resistance, making it suitable for wet areas like bathrooms and balconies.
Always wear gloves and a mask while mixing or applying. Avoid contact with the eyes or prolonged skin exposure. Store the product in a cool, dry place.